This handy little tool gets applied to the corner of your 4×4 or 6×6 wood post and automatically centers the middle of the post so you can quickly start using your Titan Hole Saw to start boring your hole exactly in the center of your post.
For this and many other Titan Post Anchor accessories please visit www.myocstore.com
The Titan Post Anchor is already a very impressive pc. of form and function but it just got better. Now you can dress up you Titan with post skirts that come in a variety of colors. They are a snap fit pc and they are made of powder coated aluminum and they are avialable for both the 4×4 Titan and 6×6 Titan.
If that wasn’t enough there are some handy installation tools that make the Titan even easier to install then it is already. There is now a hammer tool that helps drive the anchor to the post and even a center guide which allows you to find the center of the post quickly. You can now throw away that pencil. And not last but least a hole saw and arbor for both the 4×4 Titan and 6×6 Titan.
The gasket kit which has been availble since the inception of the anchor is available for sealing out water from the base of the anchor and is to be used when installing the anchor on water proof surfaces such as concrete. Its made of EDPM rubber and fits the base of Titan.
Otter Creek is a proud distributor of the Titan and its accessories and they can be purchased online at www.myocstore.com
We are very pleased to introduce the following product lines for sale in the Spring of 2009. These accessories will add beauty and make installation even easier for your Titan Post Anchor.
Post Skirts for 4×4 Titan Base
The bases are available in galvanized Black, Grey, Brown, White and Stainless. Once you have your Titan secured to the deck surface just slip the base covers over the the bottom of the Titan and snap the two ends together, its that easy. The covers are great for matching your deck surface or just highlighting the base of each post.
Holes Saws for 4×4 and 6×6 Titans.
Installation just got a whole lot easier with our custom hole saws. The holes saws are custom made and include a high quality arbor for all in one convenience.
Hammer Tool for 6×6 Titans
This handy tool fits inside the tube and evenly distributes the force of each hammer strike to the tube and right into the heart of the post. What a big time and energy saver if you are a builder or just have lots of anchors to install.
Center Guides for 4×4 and 6×6 Anchors
Finding the center of a post has never been easier or quicker using these metal hole saw center guides. No more tracing out diagonal lines or pilot cuts. Just hold again the corner of the piece, place hole saw against the vertical guides and the hole saw blade will mark center in seconds.
For further information please visit our link to our Titan page or call 1-800-981-3590
http://www.ottercreekforestproducts.com/titan-post-anchors.html
