myocmedia.com

Diamond Essence Ipe Door Mat

rabbott Ipe Outdoor Wood Flooring Tile balcony, balcony renovation, Building Deck, Canadian Homeowners, Canadian Retail Stores, Concrete Pad, Concrete Patio, deck boards, Deck Materials, Diamond Essence, Diamond Products, Door Mat, hardwood decking, ipe, ipe deck tiles, Ipe Decking, ipe decking in canada, ipe decking in toronto, Ipe flooring, ipe installation, ipe interior hardwood flooring, Massive Savings, Outdoor Flooring, patio renovation, Possibilities, roof top deck materials, Sqft, suana renovation, Tile Installation, Tiles, Traditional Deck

Cutek Green Wood Restoration

I tried this product on a pc of Pressure Treated Spruce and within a matter of minutes it had soaked entirely through the entire pc of wood. I have used several other wood preservatives and have never seen anything like this product. This product will seek out the water filled cells within the pc of wood and migrate to the cells and drive the moisture out. It does make sense when you think about it. If you have little or no moisture within a pc of wood the less likely you would get rot, twist and warp of your deck boards. I also like the fact that this product acts not only as a wood preservative but also seals and beautifies your deck. The Cutek Green comes in clear 5L containers and there are 18 different colors that are contained within packets and you simply pick your color and pour and stir into the clear Cutek. This product was formulated by a company in Australia called Chemisys Group where for many years they have developed effective stains and sealers for Australian species of wood that are subject to the extreme temperature conditions in that country. They are now bringing their product to the North American marketplace so decking contractors and homeowners will have available to them this really great product.

Otter Creek is the Canadian distributor and product can be purchased through them by calling 1-800-981-3590 or visiting their online store at www.myocstore.com

rabbott Cutek Green Wood Preservative Australia, Australian Species, Canadian Distributor, Cells, Containers, Cutek Green, deck boards, deck maintanance, decking preservatives, Different Colors, Extreme Temperature Conditions, Matter Of Minutes, North American Marketplace, Otter, otter creek, restoration of an old deck, Restoration Professionals, restoring a deck, restoring a deck surface, restoring cumaru decking, restoring decks in canada, restoring Ipe decking, restoring pressure treated decking, Seals, Species Of Wood, Stains, Warp, weathered deck, weathered deck surface, Wood Decking, wood decking stains, Wood Preservative, Wood Preservatives, Wood Restoration

Tigerwood Decking Brown Sugar Applied

Our company Otter Creek located in Ontario, Canada has a couple of product lines the work well when trying to restore or finish a Ipe, Tigerwood or Cumaru deck for the first time or restoring after several years. We have found good results in the Woodrich Hardwood Finishing Kit and the Cutek Green products. Both products have attributes that other stain and sealers don’t offer. The Woodrich product is formulated with natural pigments that are found in Ipe (Amaretto color formula) and with Tigerwood and Cumaru its the (Brown Sugar color formula). When applied because the stain is formulated to the natural pigments found in these tropical hardwood species it takes longer for the UV rays to break down the wood surface which in turn results in graying of the wood surface. Most homeowners and contractors are finding they only need to apply once every two years. The other big plus is the product will not peel and flake which is a very big issue when dealing with stain products for hardwoods.

The  Cutek Green works in a similar way but deeper penetration occurs with this product because it has a special wood preservative formula that migrates through the entire pc of wood (not just the surface) and provides additional stability to species such as tropical hardwoods and domestic species such a Pressure Treated Spruce, Pine, Fir and Western Red Cedar. The migration takes place within the living cells of the wood that contain water and drives the water out making the wood product more stable and protected against rot, twist and warping of your deck boards. Its available in 18 different stain colors and the colors come in packets that you mix into the clear product. Decking contractors like this product because it can be wet stacked which speeds up the installation time. Because the penetration rate is quicker than most products there is no worry of lap marks or brush stroke marks appearing from stopping and starting over a hour or days time.

Both of these products can be purchased at Otter Creek  by shopping online at www.myocstore.com or by calling 1-800-981-3590.

rabbott Deck Stain and Preservative Brown Sugar, Brush Stroke, canadian decking contractors, Canadian Homeowners, cleaning a tigerwood deck, Cumaru decking, Cutek Green, deck boards, decking accessories in canada, decking preservatives, Domestic Species, finishing hardwood decking, finishing ipe decking in canada, Flake, Hardwood Species, Installation Time, ipe, Ipe Deck, Ipe Decking, Lap Marks, Natural Pigments, Ontario Canada, Otter, otter creek, peel, Penetration Rate, preserving western red cedar, pressure treated decking products, refinishing a western red cedar deck, restoring a hardwood deck, Spruce Pine Fir, Stain Colors, tigerwood, tigerwood decking, Tropical Hardwood, tropical hardwoods, Uv Rays, western red cedar, Wood Preservative, Wood Preservatives, Wood Surface, WoodRich Deck Stain and Sealer

Cutek Green Wood Preservative before and after

Its now here and available from Otter Creek Forest Products. Cutek Green is like no other wood preservative on the marketplace. This product will give Canadian and U.S. Homeowners  something to smile about when used. Cutek Green has been used in Australia for many years treating large timbers to protect against twist and warp. This patented formula acts like no other wood preservative in the marketplace. Once applied the product migrates through the entire pc of wood from surface to core.  It seeks out water absorbed pours and extracts the moisture out of the pc of wood making the pc the wood much more stable and preserved at the same time. Decking contractors will also like the fact this product can be wet stacked and applied immediately to the deck surface. Imagine being able to treat your deck boards and being able to fasten the deck boards immediately to the deck surface without having to wait for the product to dry.  Another great feature of this product is it can be applied partially one day and finished the next day without fear of having overlap marks of worry of color variation. The spread rate of this product is 1,000-1400sqft per gallon. Cutek Green comes in 1 gallon sizes and larger if needed and comes clear with options of 18 different color tones that are formulated to enhance the natural character and beauty of the wood without obscuring the grain. This product is an excellent coating alternative for Western Red Cedar, Pine, Hemlock and tropical hardwoods like Ipe, Cumaru and Tigerwood. For further information or to purchase this product please contact Robert Abbott at toll free 1-800-981-3590 or you can purchase on their online store at www.myocstore.com

rabbott Cutek Green Wood Preservative canadian decking contractors, Color Tones, Color Variation, cumaru, Cutek Green, deck boards, deck surface, decking contractors, Different Color, Forest Products, Formula Acts, Gallon Sizes, Hemlock, ipe wood preservative, Marketplace, Natural Beauty, Natural Character, Otter, otter creek, preserving a pressure treated deck, preserving wood doors, preserving wood products, Pressure Treated Decking, preventing twist and warp, preventing twist and warp in deck boards, Robert Abbott, Spread Rate, tigerwood, Timbers, tropical decking prevervative, tropical hardwood preservative, tropical hardwoods, Warp, Wood Preservative, wood preservative for deck boards, wood preservative for my deck, wood stabilizer

SUBJECT: Point Load Test Results on 4×4, 6×6 and 4×4 with Post Brace Anchors with regards to

manufacturer’s instructions. The load was applied at 42” above the deck surface to one face of the post.

The 4×4 post anchors achieved an average maximum load at failure of 337 lbs. The mode of failure for these

post anchors was the lag screws pulling out from the bottom of the wooden post. The 6×6 post anchors

achieved an average maximum load at failure of 503 lbs. The mode of failure for these post anchors was the

pan head screws pulling out from the deck boards. The 4×4 post anchors with post braces attached achieved an

average maximum load at failure of 499 lbs. The mode of failure for these post anchors was that the pan head

screws that attach the post anchor brace to the wooden post pulled out.

The Titan Post Anchors can be purchased at www.myocstore.com

rabbott Titan Post Anchor 4x4 titan post anchor, 6x6, 6x6 titan post anchor, anchor, Anchors, anchors for wood posts, Braces, deck boards, Deck Platform, deck surface, Failure, Head Screws, Hydraulic Ram, Intertek Testing Services, Lag Screws, Load Cell, load test for titan post anchor, Load Testing, Maximum Load, myocstore, Pan Head, Point Load Test, post anchors, post supports, securing posts, securing wood posts, Test Reports, Test Results, Titan, wood post anchors, wood post support