Archive

Posts Tagged ‘Weathered Lumber’

What is the price of Cutek Green?

May 30th, 2011

Cutek Green Wood Preservative

Thank You for your interest in the Cutek Green. We ship the product directly from our warehouse in Ingersoll, Ontario. Shipping on a 5L amount to the Barrie, Ontario area would be $15.00 and the cost of the clear Cutek is $99.50 and we do not charge anything extra for the color tint. Which color tint are you interested in? We do not stock all colors but some of the more popular ones are for pressure treated decks and cedar decks. If you would like to call me to discuss I can be reached at 1-800-981-3590 or you can purchase this product online at www.myocstore.com

  • Share/Bookmark

rabbott Cutek Green Wood Preservative , , , , , , , , , , , , , , , , , , , , , , , , , ,

Cutek Pro Clean for Weathered Decks

May 12th, 2011

Preparation for Cutek Pro Clean

Because of the wide variation in discoloration and wood species that are encountered, a test area should always be cleaned prior to commencement of the project to determine how much time the restoration procedure will require, and how much Cutek ProClean will be required.

This enables an accurate application procedure to be determined and cost estimated. It is important for the homeowner or contractor to determine the suitability of the product for its intended application.

It is preferable to use Cutek ProClean as supplied and it must always be mixed well before use. Sometimes however, the use of hot water rinsing combined with an easy to clean surface, means that Cutek ProClean can be diluted with water. If a choice to dilute the product is made, always test to determine if the dilution being used is effective in cleaning

Cutek ProClean Application

Apply Cutek ProClean liberally to a pre-wetted wood substrate with brush, roller, or garden sprayer. Let Cutek ProClean do most of the work by letting it dwell on the surface for 10 minutes — 8 hours, or such time as deemed to be necessary by the test procedure. It may be necessary to scrub stubborn stains moderately with a stiff fiber brush.

Recoating

Following the restoration of the timber with Cutek ProClean, it is important to complete the restoration process by coating the timber with Cutek® Green. Application of Cutek® Green eliminates the need for any future stripping because it will not form a film that will peel off like a varnish. Additionally, it has been specifically designed to maximize the dimensional stability and aesthetic qualities of natural wood, while providing protection against ultraviolet degradation, moisture and biological growth. Always remember that film-forming coatings can peel and may need to be sanded, stripped, or scraped when reapplication is necessary.

It is important that the restored wood is completely dry before the application of Cutek® Green. Allow 3 – 4 days of hot, fine drying weather. If unsure, use a moisture meter to measure the residual moisture content of the restored wood to make sure that it is less than 18% before coating.

If you would like further information or pruchase this product please contact Robert Abbott from Otter Creek at 1-800-981-3590 or visit their online store at www.myocstore.com

  • Share/Bookmark

rabbott Cutek Pro Deck Cleaner , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Montana Ghostwood reclaimed wood that comes from new wood.

May 25th, 2009

ghostwood10Now I must say I have been an advocate of reclaimed wood for several years and in fact we stocked some in our yard in years past but it became a problem finding the old barns and other reclaimed materials that shipped cost effectively to our location. Not only shipping cost was a problem but finding qualified help and insurance was a big issue. To top things off the cost of the final product become so expensive due to the above factors and the waste that we incurred due to the reclaimed wood having knots, splits and other unusable defects we decided to discontinue the reclaimed wood altogether, until now!

A few months ago I was approached by a company called BitterRoot Valley Forest Products asking if I was interested in a reclaimed product from NEW WOOD, yes I said NEW WOOD. I listed to the gentleman speak for nearly an hour and was still very sceptical after we hung up.  At the end of the conversation he indicated he would be sending me samples to review and that once I seen these samples that I would become a believer of their product.

Well as the saying goes “the rest is history” when I received the samples I could not believe my eyes. Here was NEW WOOD looking like it was 200 years old and to much surprise it was virtually defect free. I called my contact back and asked how quickly I could become  a distributor. He explained that they were building a new website dedicated to “Ghostwood”, you heard me right “Ghostwood” and that my area was open for a distributor and that I should check bakc a few months later for the new website called www.mtghostwood.com .

Today is May 25th and is our first official day of becoming the distributor for this product and I wanted to share some information about the product on my blog so please take a few minutes and review the reasons why you should consider this product the next time your looking to purchase reclaimed wood for your next project.

  • 30-70% of reclaimed wood used in construction that is supplied are from declining supplies of old barns and ghost towns end up being thrown away due to rot, splits and defects.
  • There is little to no waste with Montana Ghost Wood, every piece is usable and can be ordered to exact specifications.
  • A portion of all profits received are donated to the Montana Ghost Town Preservation Society.
  • All the shavings and chips produced at their mill are recycled and sold as bedding to local farmers.
  • It is nearly impossible to tell Montana Ghost Wood from naturally weathered wood.
  • 50% less on average per board foot price than reclaimed lumber from other sources.
  • Available in custom sizes
  • Available in four classic colors Bannack Brown, Silver City, Ruby River and Blackfoot.
  • Available in two classic textures Weathered and Circle Sawn Weathered
  • Can be used in a variety of applications such as doors, siding, paneling, trim, fascia, flooring and even furniture.
  • Can be used for both outside and inside applications.
  • Much higher percentage of usablewood with less defects which reduces waste and installation time.
  • Guaranteed to hold the reclaimed patina for the lifetime of the wood with no additional staining or treatment applications required.
  • BitterRoot Valley Forest Products is dedicated to responsibly managing their forests while preserving the historical towns for future generations to enjoy.

Montana Ghost Wood is dedicated to use as much salvaged timber from the wild fires and beetle killed forest as possible. The Mountain Pine Beetle and forest fires kill living trees but do not harm the integrity of the wood. A large percentage of the company’s timber is salvaged from these standing dead trees. Due to the high altitudes, low humidity, and short growing season; these dead standing trees are some of the best timber around because its been dried naturally by Mother Nature.
Generally left to rot on the stump and go to waste, these trees are now being reclaimed and used in the companies “Montana Ghost Wood” product line. Reclaimed from the forests for their customers for generations to come. BitterRootValley Forest Products are proud to have partnered with fellow local mills, which purchase a large percentage of their timber from SFI (Sustainable Forest Initiative) certified mills.

For more information on ghostwood please visit our website at www.ottercreekforestproducts.com . We have samples and brochures that can be sent upon request.

  • Share/Bookmark

rabbott Ghostwood Reclaimed Lumber , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,